Manufactured from 22g or 20g pre galvanised steel section perforated to allow 30% light transmission and rolled to suit a curved lath profile of nominal 75mm and flat lath profile of 50mm. Each interlocked to form continuous curtains fully secured by either steel or nylon endlocks for maintenance free movement. We recommend the curtain be either plastisol HP200 coated or powder coated. Side channels to be 50mm x 25mm steel section for extra strength. Galvanised canopies. All these can be painted or powder coated in a colour to suit.

Self coiling action with counter-balancing springs is standard. Gear operation may be provided with fixed or removable operating handle. Electrical operation is also available from 240v 50Hz single phase supply operated by push button or keyswitch. Locks would normally be omitted for electrical operation. Guides may be fixed or removable as required.

The curtain is constructed of 76mm (3″) interlocking curly lath. The curtain is galvanised finished as standard but colour coated plastisol HP200 British standard colour coded which is available in a variety of attractive colours in a tough, durable finish which will enhance the appearance of any building.

Self coiling action with counter-balancing springs. standard. Gear operation may be provided with fixed or removable operating handle. Electrical operation is also available from 240v 50Hz single phase supply operated by push button or keyswitch. Locks would normally be omitted for electrical operation. Guides may be fixed or removable as required.
• Bottom rail with lifting handle and barrel bolts locking into guides
• Hoods to enclose the shutter may also be provided in galvanised steel at an extra cost
• Cylinder key operated locks may be provided at an extra cost
• All steel work can be painted in a colour to suit